Vol. 8 No. 8 (1991): Former "Proceedings of the Institute of Production Engineering"

Some aspects of laser and other alternative technologies use for metal cutting

Dragoje Milikić, Pavel Kovač, Zdenko Krajny

1-7

FULL TEXT ARTICLE (PDF)

DOI: https://doi.org/10.24867/JPE-1991-08-001

abstract views: 411 // FULL TEXT ARTICLE (PDF): 111

The effect of welding current, arc voltage and welding speed on dimensions of seams cross section

Vlastimir Palić

9-17

FULL TEXT ARTICLE (PDF)

DOI: https://doi.org/10.24867/JPE-1991-08-009

abstract views: 271 // FULL TEXT ARTICLE (PDF): 121

The influence of automatic submerged arc welding regime parameters on the weld penetrations

Vlastimir Palić, Sabo Bela, Jadranko Alanović

19-30

FULL TEXT ARTICLE (PDF)

DOI: https://doi.org/10.24867/JPE-1991-08-019

abstract views: 333 // FULL TEXT ARTICLE (PDF): 107

Defining of the characteristic ways for workpieces positioning in the fixture

Milorad Rodić

31-45

FULL TEXT ARTICLE (PDF)

DOI: https://doi.org/10.24867/JPE-1991-08-031

abstract views: 249 // FULL TEXT ARTICLE (PDF): 116

Data bank development and organization for automatic selection of tools and cutter conditions for grinding

Velimir Todić

47-58

FULL TEXT ARTICLE (PDF)

DOI: https://doi.org/10.24867/JPE-1991-08-047

abstract views: 228 // FULL TEXT ARTICLE (PDF): 135

Analyse of programming languages for numerical controlled measuring machines programming (PART II)

Siniša Vasić

59-73

FULL TEXT ARTICLE (PDF)

DOI: https://doi.org/10.24867/JPE-1991-08-059

abstract views: 101 // FULL TEXT ARTICLE (PDF): 135

Conceptions analyse of measuring systems in the flexible manufacturing systems

Siniša Vasić

75-88

FULL TEXT ARTICLE (PDF)

DOI: https://doi.org/10.24867/JPE-1991-08-075

abstract views: 221 // FULL TEXT ARTICLE (PDF): 123

An analysis of extrusion - forging process

Miroslav Plančak, Plavka Francuski

89-101

FULL TEXT ARTICLE (PDF)

DOI: https://doi.org/10.24867/JPE-1991-08-089

abstract views: 192 // FULL TEXT ARTICLE (PDF): 130

Journal of Production Engineering

Vol 8, No 8 (1991): Former "Proceedings of the Institute of Production Engineering"

Original Research Article

Some aspects of laser and other alternative technologies use for metal cutting

The effect of welding current, arc voltage and welding speed on dimensions of seams cross section

The influence of automatic submerged arc welding regime parameters on the weld penetrations

Defining of the characteristic ways for workpieces positioning in the fixture

Data bank development and organization for automatic selection of tools and cutter conditions for grinding

Analyse of programming languages for numerical controlled measuring machines programming (PART II)

Conceptions analyse of measuring systems in the flexible manufacturing systems

An analysis of extrusion - forging process

##issue.tableOfContents##

Table of Contents

Original Research Article